Rick Bell Rick Bell's Profile Page

Rick Bell Rick Bell

0 Course Enrolled • 0 Course Completed

Biography

Accurate NSE5_FSW_AD-7.6 Exam Questions: Fortinet NSE 5 - FortiSwitch 7.6 Administrator supply you high-effective Training Brain Dumps - VCEEngine

Getting the Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) certification is the way to go if you're planning to get into Fortinet or want to start earning money quickly. Success in the Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) exam of this credential plays an essential role in the validation of your skills so that you can crack an interview or get a promotion in an Fortinet company. Many people are attempting the Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) test nowadays because its importance is growing rapidly. The product of VCEEngine has many different premium features that help you use this product with ease. The study material has been made and updated after consulting with a lot of professionals and getting customers' reviews.

Fortinet NSE5_FSW_AD-7.6 Exam Syllabus Topics:

Topic
Details

Topic 1

Deployment and management: This domain includes provisioning and deploying FortiSwitch in supported topologies, including multi-tenancy environments. It emphasizes proper setup, scalability, and centralized management.

Topic 2

Monitoring and troubleshooting: This domain covers packet capture methods, FortiLink troubleshooting, and diagnostic tools used to monitor traffic and resolve network issues.

Topic 3

Layer 2 control and security: This section focuses on Layer 2 security features such as port security, filtering, antispoofing, ACLs, security profiles, and VLAN security mechanisms to protect switched networks.

Topic 4

FortiSwitch concepts: This domain covers core FortiSwitch features including VLAN configuration, QoS, LLDP-MED, stacking, switching and routing, STP for loop prevention, and port and transceiver configuration. It focuses on essential switching operations and network integration.

>> NSE5_FSW_AD-7.6 Exam Syllabus <<

NSE5_FSW_AD-7.6 Dumps Cost | NSE5_FSW_AD-7.6 Reasonable Exam Price

The VCEEngine NSE5_FSW_AD-7.6 PDF dumps file is a collection of real, valid, and updated NSE5_FSW_AD-7.6 practice questions that are also easy to install and use. The VCEEngine NSE5_FSW_AD-7.6 PDF dumps file can be installed on a desktop computer, laptop, and even on your smartphone devices. Just download VCEEngine Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) PDF questions on your desired device and start NSE5_FSW_AD-7.6 exam dumps preparation today.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator Sample Questions (Q76-Q81):

NEW QUESTION # 76
Refer to the diagnostic output:

Two entries in the exhibit show that the same MAC address has been used in two different VLANs. Which MAC address is shown in the above output?

A. It is a MAC address of an upstream FortiSwitch.
B. It is a MAC address of a switch that accepts multiple VLANs.
C. It is a MAC address of FortiLink interface on FortiGate.
D. It is a MAC address of FortiGate in HA configuration.

Answer: B

Explanation:
The MAC address "00:50:56:96:e3:fc" appearing in two different VLANs (4089 and 4094) in the diagnostic output indicates it is a MAC address associated with a device that supports traffic from multiple VLANs.
Such a behavior is typical of network infrastructure devices like switches or routers, which are configured to allow traffic from various VLANs to pass through a single physical or logical interface. This is essential in network designs that utilize VLANs to segregate network traffic for different departments or use cases while using the same physical infrastructure.
References:
For more detailed information on MAC table diagnostics and VLAN configurations in FortiGate devices, refer to the official Fortinet documentation:Fortinet Product Documentation.

NEW QUESTION # 77
Exhibit.
You need to manage three FortiSwitch devices using a FortiGate device. Two of the FortiSwitch devices initiated a reboot after the authorization process. However, the FortiSwitch device with the configuration shown in the exhibit. did not reboot All three devices completed FortiLink manage-ment authorization successfully.
Why did the FortiSwitch device shown in the exhibit not reboot to complete the authorization pro-cess?
The management mode was set to use FortiLink mode.

A. The FortiSwitch device is scheduled to reboot as part the authorization process
B. The management mode was set to use FortiLink mode.
C. Switch auto-discovery is enabled.
D. The system time is not in-sync and is using a non-default value

Answer: B

Explanation:
Regarding the scenario where a FortiSwitch did not reboot after the authorization process while the other devices did, the most likely cause, given the configuration settings in the exhibit, is:
* The management mode was set to use FortiLink mode (Option B): If the FortiSwitch was already configured to use FortiLink for its management mode, it may not require a reboot to complete the authorization process as its management interface settings are already aligned with FortiLink requirements. This is unlike switches that might be transitioning from a standalone or another management mode, which would typically require a reboot to apply new management settings fully.
References:
FortiLink mode specifically tailors FortiSwitch to be managed via a FortiGate device, integrating its operation into the wider security fabric without needing a reboot if it is already set to this mode before authorization.
This contrasts with other management modes where transitioning to FortiLink could necessitate a system restart to initialize the new configuration.

NEW QUESTION # 78
Refer to the exhibit.

and an OSPF route with destination 0.0.0.0/0 [110/10]. The OSPF route is marked with a checkmark in the FIB column, while the Static route has a dash.] The routing monitor displays multiple route entries, but only some are installed in the forwarding information base (FIB). After analyzing the two route entries with the destination 0.0.0.0/0, which statement correctly describe why one of these routes is not installed in the FIB? (Choose one answer)

A. The two routes have identical destination prefixes, causing a conflict where only one is selected.
B. The OSPF route with a lower administrative distance is preferred over the static route.
C. The interface V100 for the OSPF route is down, preventing its installation.
D. The OSPF route has a higher metric, making it less preferred than the static route.

Answer: B

Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the Routing Information Base (RIB) contains all potential routes discovered by the switch, but theForwarding Information Base (FIB)only includes the "best" active routes used for hardware packet forwarding. When the routing process receives multiple paths to the exact same destination (in this case, the default route 0.0.0.0
/0), it must select the most reliable source based on a specific hierarchy.
The primary tie-breaker for routes from different protocols is theAdministrative Distance (AD). AD is a value from 1 to 255 that represents the trustworthiness of the routing source, where alower value is more preferred. In the provided exhibit:
* TheOSPFroute has an AD of110(shown as [110/10]).
* TheStaticroute has been configured with an AD of220(shown as [220/0]).
Because the OSPF route's AD (110) is lower than the Static route's AD (220), the system considers the OSPF route to be superior. Consequently, only the OSPF route is "Selected" and installed into theFIB. The static route remains in the RIB as a "backup" or floating static route; it will only be moved to the FIB if the preferred OSPF route becomes unavailable. Option D is incorrect because having identical prefixes is not a
"conflict" but a standard part of route selection where AD decides the winner. Option A is incorrect because metric is only compared if the AD is identical.

NEW QUESTION # 79
Refer to the exhibit.

The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports, and these ports are connected to endpoints which are powered by PoE.
Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?

A. Add power management as part of LLDP-MED TLVs to advertise.
B. Define an LLDP-MED location ID to use standard protocols for power.
C. Create new a LLDP-MED application type to define the PoE parameters.
D. Assign a new LLDP profile to handle different LLDP-MED TLVs.

Answer: A

Explanation:
To cause endpoints to exchange PoE information and negotiate power with the managed FortiSwitch via LLDP, you should configure the LLDP profile to include power management in the advertised LLDP-MED TLVs. Here are the steps:
* Access the LLDP Profile Configuration:Start by entering the LLDP profile configuration mode with the command:
config switch-controller lldp-profile
edit "LLDP-PROFILE"
* Enable MED-TLVs:Ensure that MED-TLVs (Media Endpoint Discovery TLVs) are enabled. These TLVs are used for extended discovery relating to network policies, including PoE, and are essential for PoE negotiation. They include power management which is crucial for the negotiation of PoE parameters between devices. The command to ensure network policies are set might look like:
set med-tlvs network-policy
* Add Power Management TLV:Specifically add or ensure the power management TLV is part of the configuration. This will advertise the PoE capabilities and requirements, enabling dynamic power allocation between the FortiSwitch and the connected devices (like VoIP phones or wireless access points). This can typically be done within the network-policy settings:
config med-network-policy
edit <policy_index>
set poe-capability
next
end
* Save and Apply Changes:Exit the configuration blocks properly ensuring changes are saved:
End
* Verify Configuration:It's always good practice to verify that your configurations have been applied correctly. Use the appropriateshoworgetcommands to review the LLDP profile settings.
By adding the power management as part of LLDP-MED TLVs, the FortiSwitch will be able to communicate its power requirements and capabilities to the endpoints, thereby facilitating a dynamic power negotiation that is crucial for efficient PoE utilization.
References:For more detailed information and additional configurations, you can refer to the FortiSwitch Managed Switches documentation available on Fortinet's official documentation site:Fortinet Product Documentation

NEW QUESTION # 80
How is traffic routed on FortiSwitch?

A. FortiSwitch looks up the hardware routing table and then the forwarding information base (FIB).
B. Hardware-based routing on FortiSwitch is handled by the CPU.
C. ASIC hardware routing can only handle dynamic routing, if supported.
D. Layer 3 routing can be configured on FortiSwitch, while managed by FortiGate.

Answer: D

Explanation:
Layer 3 routing can be configured on FortiSwitch, while managed by FortiGate (D): FortiSwitch, when managed by FortiGate, supports Layer 3 routing capabilities. This allows for routing between VLANs directly on the switch, enhancing network efficiency by reducing the need to pass traffic through higher network layers for inter-VLAN communication. This configuration enables more sophisticated network setups and efficient routing directly at the switch level.

NEW QUESTION # 81
......

Once you learn all NSE5_FSW_AD-7.6 questions and answers in the study guide, try VCEEngine's innovative testing engine for exam like NSE5_FSW_AD-7.6 practice tests. These tests are made on the pattern of the Fortinet real exam and thus remain helpful not only for the purpose of revision but also to know the real exam scenario. To ensure excellent score in the exam, VCEEngine’s braindumps are the real feast for all exam candidates. They contain questions and answers on all the core points of your exam syllabus. Most of these questions are likely to appear in the NSE5_FSW_AD-7.6 Real Exam.

NSE5_FSW_AD-7.6 Dumps Cost: https://www.vceengine.com/NSE5_FSW_AD-7.6-vce-test-engine.html

Our Blog

Rick Bell Rick Bell

Biography

Useful Links

Contact us